Hot-rolled flat product for tanks and vessels
Stainless Steel Plate
Hot-rolled plate is commonly specified for dip tanks, coagulation tanks, vessels and heavy structural parts. Review the grade, governing standard, thickness tolerance, surface condition, test certificates and handling requirements.
Standards
- ASTMA240 / A480 (ASME SA-240)
- JISG4304 (hot-rolled)
- EN10088-2 (on request)
Dimensions
- Thickness
- 3 - 80 mm
- Width
- 1000 / 1219 / 1500 / 2000 mm
- Length
- 2000 - 6000 mm, cut to size
Finishes and applications
- Dip & coagulation tanks
- Pressure vessels & drums
- Heavy structural & wear parts
Grades and properties
These values are references for quotation review. Actual heat values should be checked against the applicable mill test certificate.
304 / SUS304
ASTM 304 (S30400) / JIS SUS304 / EN 1.4301
Composition, wt %
Minimum mechanical properties
- Tensile strength
- ≥ 515 MPa (75 ksi)
- Yield strength (0.2%)
- ≥ 205 MPa (30 ksi)
- Elongation
- ≥ 40%
- Hardness
- ≤ 201 HB / 92 HRB
Annealed minimums based on ASTM A240 plate and sheet requirements. Tube standards such as A554 may differ; confirm the governing product standard and applicable mill test certificate.
304L / SUS304L
ASTM 304L (S30403) / JIS SUS304L / EN 1.4307
Composition, wt %
Minimum mechanical properties
- Tensile strength
- ≥ 485 MPa (70 ksi)
- Yield strength (0.2%)
- ≥ 170 MPa (25 ksi)
- Elongation
- ≥ 40%
- Hardness
- ≤ 201 HB / 92 HRB
Annealed minimums based on ASTM A240 plate and sheet requirements. Tube standards such as A554 may differ; confirm the governing product standard and applicable mill test certificate.
316 / SUS316
ASTM 316 (S31600) / JIS SUS316 / EN 1.4401
Composition, wt %
Minimum mechanical properties
- Tensile strength
- ≥ 515 MPa (75 ksi)
- Yield strength (0.2%)
- ≥ 205 MPa (30 ksi)
- Elongation
- ≥ 40%
- Hardness
- ≤ 217 HB / 95 HRB
Annealed minimums based on ASTM A240 plate and sheet requirements. Tube standards such as A554 may differ; confirm the governing product standard and applicable mill test certificate.
316L / SUS316L
ASTM 316L (S31603) / JIS SUS316L / EN 1.4404
Composition, wt %
Minimum mechanical properties
- Tensile strength
- ≥ 485 MPa (70 ksi)
- Yield strength (0.2%)
- ≥ 170 MPa (25 ksi)
- Elongation
- ≥ 40%
- Hardness
- ≤ 217 HB / 95 HRB
Annealed minimums based on ASTM A240 plate and sheet requirements. Tube standards such as A554 may differ; confirm the governing product standard and applicable mill test certificate.
Project intake
Need help planning shipment and documentation for Stainless Steel Plate?
We provide industrial procurement support through supplier coordination, technical document review and cross-border delivery coordination.